Ms28775 O Ring
Ms28775 O Ring : Men Fashion Rings.
- (O-Rings) are generally used as dynamic seals for shafts and are available in many different sizes and materials.
- A gasket in the form of a ring with a circular cross section, typically made of pliable material, used to seal connections in pipes, tubes, etc
- a gasket consisting of a flat ring of rubber or plastic; used to seal a joint against high pressure
- An O-ring, also known as a packing, or a toric joint, is a mechanical gasket in the shape of a torus; it is a loop of elastomer with a disc-shaped cross-section, designed to be seated in a groove and compressed during assembly between two or more parts, creating a seal at the interface.
-202 Viton O-Ring, 75A Durometer, Black, 1/4" ID, 1/2" OD, 1/8" Width (Pack of 25)
This Viton O-ring is black in color, round in shape, has a durometer (hardness) of 75A, and is designed for use in a wide variety of sealing applications. Viton has excellent heat, fuel, and chemical resistance. Viton is acceptable for temperature applications between -15 degrees F (-26 degrees C) to 400 degrees F (205 degrees C). It is compatible for use with non-flammable hydraulic fuels, silicone oil, chlorinated hydrocarbons (trichlorethylene), fuels, aromatic hydrocarbons (benzene) and aliphatic hydrocarbons (propane), as well as high vacuum environments, ozone, and weathering. Viton is vulnerable to low molecular organic acids, ammonia gas, alkalis, amines, glycol-based brake fluids, and super-heated steam. This Viton O-ring has a shore durometer of 75A. Shore durometer is the hardness of a material, and its resistance to permanent indentation. A higher durometer value indicates greater resistance to indentation on a scale of 0 to 100, with 100 indicating no indentation. O-rings commonly provide a pressure and fluid seal between cylindrically shaped, overlapping mating surfaces and are commonly seen in engines, faucets, flanges, valves and various cylinders. They are circular in shape, with a round cross section and a hole in the center, similar to a doughnut. O-rings are available in various sizes, and can be ordered based on required nominal inside diameter (ID), outer diameter (OD), and cross-sectional (CS) diameter. This Viton O-ring meets standards defined by Aerospace Standard AS568A, which is the Aerospace Size Standard for O-rings.
87% ( 19)
ms28775 o ring
Replacement o-rings for your 2g body jewelry. Please use the following notes to help you choose the correct o-ring for your jewelry: For plugs, spools, eyelets, retainers, or any other jewelry that is NOT tapered, select the o-ring that has the same gauge as your jewelry.
For all TAPERED products such as claws, horns, pinchers, spirals and wearable tapers, select an o-ring one gauge smaller than the gauge of the jewelry.
In order to keep the o-ring in place the inside diameter is always 2 gauges smaller than the stated gauge of the o-ring. For example, a 0g o-ring has an inside diameter of 4g.
*** SOLD SINGLY, ORDER 2 FOR A PAIR ***
Similar posts:
cross navel rings
white gold wedding rings with diamonds
wedding ring for him
emerald ring designs
customized wedding rings
a jaffe engagement rings
gold cz rings
latest engagement ring
|